52
Sending documents from memory
!
The unit is able to scan and store documents into memory, and then transmit the stored documents.
The memory capacity is approx. 25 pages, based on the CCITT No. 1 test chart in standard resolution. For the
CCITT No. 1 test chart, see page 124.
Setting memory transmission
!
1
Press
(MENU)
.
Display:
2
Press
K
, then
A E
.
3
Press
(START/COPY/SET)
.
4
Press
or
to select “ON”.
¡
If this feature is not required, select “OFF”.
5
Press
(START/COPY/SET)
.
6
Press
(MENU)
.
SETUP ITEM [ ]
MODE=ON [
Ÿÿ
]
MODE=OFF [
Ÿÿ
]
MEMORY XMT
SYSTEM SET UP
Transmitting documents from memory
!
1
Insert the documents FACE DOWN.
2
Enter the telephone number by using regular
dialing, one-touch dialing, speed dialing or the
electronic telephone directory.
3
When using regular dialing, press
(START/COPY/SET)
.
¡
The documents will be fed into the unit and
scanned into memory.
After storing all of the pages, the unit will transmit
the documents.
¡
The amount of memory used will be shown as a
percentage on the display.
Display:
Amount of memory used
PAGES=01 05
Note:
¡
The stored documents will be automatically erased after transmission.
¡
To cancel the memory transmission, press
(STOP)
during or after scanning the documents.
¡
If you select the fine, super fine or halftone resolution, the number of documents that can be sent will be
decreased.
¡
If the stored documents exceed the memory capacity, the transmission will be canceled.
Dial keypad
FACE DOWN
(STOP)
(START/COPY/SET)
1
2
3
4
5
6
7
8
9
0
(START/COPY/SET)
(MENU)
Dial keypad
Sending Faxes