1. Introduction and Installation
18
1.7.2 For KX-FLB803 users
Pull the output tray extender (
1
) forward gently
until it clicks into place, then press the centre
part of the extender (
2
) to open.
Note:
L
The output tray can hold up to approximately
150 sheets of printed paper. Remove the
printed paper before the output tray becomes
full.
If the top part of the extender is detached
1.
With the top part of the extender in the open
position, insert the tab (
1
) into the left hole
(
2
) of the extender.
2.
Slide the other tab (
1
) into the right hole (
2
)
of the extender from below until it clicks into
place.
If the extender is detached
■
KX-FLB813
1.
Line up the extender (
1
) underneath the
output tray (
2
), and insert the left side of the
extender into the output tray.
2.
Attach the extender (
1
) by bending the side
of the output tray downward slightly and
pressing the right side of the extender.
1
2
1
2
1
2
1
2
1
FLB803-813EX-PFQX2433ZA-en.book Page 18 Tuesday, April 25, 2006 6:45 PM
Содержание KX-FLB803EX
Страница 101: ...99 Notes ...