16
Setup
Toner cartridge and drum unit
!
Caution:
●
Read the instructions below before you begin installation. After you have read them,
open the drum unit protection bag. The drum unit contains a photosensitive drum.
Exposing it to light may damage the drum. Once you have opened the protection bag:
— Do not expose the drum unit to light for more than 5 minutes.
— Do not touch or scratch the green drum surface.
— Do not place the drum unit near dust or dirt, or in a high humidity area.
— Do not expose the drum unit to direct sunlight.
●
Do not leave the toner cartridge out of the protection bag for a long time. It will decrease
the toner life.
4
Slide the tab on the toner cartridge
into the slot of the drum unit.
Tab
Slot
5
Firmly press down on the right side of
the toner cartridge to snap into
position.
Toner
cartridge
Red arrows
Drum unit
Hold here.
Green drum
surface
2
Remove the toner cartridge and drum
unit from the protection bags. Peel off
the seal from the toner cartridge (
#
).
Remove the protection bar from the
drum unit (
$
).
Seal
Protection bar
Drum unit
Toner
cartridge
1
2
3
With “Panasonic” face up on the
toner cartridge, match the red arrows
on the cartridge and the drum unit.
1
Before opening the protection bag of
the new toner cartridge, shake it
vertically more than 5 times.