Features Summary
66
Code
Feature & Display
Settings
How the unit operates
You can confirm the status of the
other party’s machine.
●
If the ring back tone continues, the
other party’s machine may not be
a facsimile or may have run out of
paper. Check with the other party.
●
The connecting tone volume
cannot be adjusted.
#76
Setting the connecting tone
If you often have trouble when
sending a fax, this feature allows
you to hear connecting tones: fax
tone, ring back tone and busy tone.
CONNECTING TONE
=ON
[±]
ON
OFF
#68
Setting the Error Correction
Mode (ECM)
To send a fax even if there is static
interference on the telephone line.
ECM SELECTION
=ON
[±]
ON
OFF
This feature is available when the
transmitting/receiving stations are
ECM compatible.
#80
Resetting advanced features to
their default settings
SET DEFAULT
RESET=NO
[±]
YES
NO
1. Follow steps 1 and 2 on page 64.
2. Press
+
or
-
to select “YES”.
3. Press
w
.
4. Press
w
again.
5. Press
p
.
#79
Saving on toner consumption
TONER SAVE
=OFF
[±]
ON
OFF
“ON”: The toner cartridge will last
longer.
●
This feature may lower the print
quality.
#58
Setting the original mode
To send or copy a document with
faint or dark writing, set this feature
before starting transmission or
copying.
ORIGINAL
=NORMAL
[±]
NORMAL
LIGHT
DARKER
“NORMAL”: Used for normal
writing.
“LIGHT”: Used for faint writing.
“DARKER”: Used for dark writing.
“AUSTRALIA”: To use in Australia
“NEW ZEALAND”: To use in New
Zealand
#74
Setting the location where you
use this unit
This setting must match your
location.
LOCATION
=AUSTRALIA
[±]
AUSTRALIA
NEW ZEALAND