8. Programmable Features
83
k
and
l
on the handset are not displayed
properly, the line mode selection is incorrect. Set
line mode to
“
A
”
.
{
1
}
“
A
”
{
2
}
“
B
”
(default)
Note:
L
You can also program this feature with the
handset (feature 0531 or feature 0532 on
page 89).
{#}{
6
}{
7
}
Setting the incoming message
monitor
To hear an incoming message (ICM) from the
speaker when the answering machine is
recording the message.
{
1
}
“
ON
”
(default): You can monitor the incoming
message.
{
2
}
“
OFF
”
: Deactivates this feature.
LINE 1:
{#}{
7
}{
2
}{*}
LINE 2:
{#}{
7
}{
2
}{#}
Setting flash time
The flash time depends on your telephone
exchange or host PBX.
{
1
}
“
90ms
”
{
2
}
“
100ms
”
{
3
}
“
110ms
”
{
4
}
“
250ms
”
{
5
}
“
300ms
”
{
6
}
“
400ms
”
{
7
}
“
600ms
”
{
8
}
“
700ms
”
(default)
Note:
L
The setting should stay at 700 ms unless
pressing
{
FLASH/CALL WAIT
}
fails to pick
up the Call Waiting call.
L
If the unit is connected via a PBX, PBX
functions (transferring a call etc.) might not
work correctly. Consult your PBX supplier for
the correct setting.
L
You can also program this feature with the
handset (feature 0521 and feature 0522 on
page 89).
{#}{
7
}{
3
}
Setting the incoming call tone
This tone lets you know when a call is being
received on the other line, during a conversation
on the base unit.
{
1
}
“
OFF
”
: Deactivates this feature.
{
2
}
“
2
”
(default): The tone will sound 2 times.
{
3
}
“
ON
”
: The tone will sound for as long as the
line rings.
Note:
L
You can also program this feature with the
handset (feature 0
*
2 on page 90).
{#}{
7
}{
4
}
Setting room monitor
{
1
}
“
ON
”
{
2
}
“
OFF
”
(default)
See page 53 for details.
Note:
L
You can also program this feature with the
handset (feature 0
*
3 on page 90).
{#}{
7
}{
5
}
Setting the Caller ID number auto
edit feature
{
1
}
“
ON
”
(default)
{
2
}
“
OFF
”
See page 47 for details.
{#}{
7
}{
6
}
Setting the connecting tone
If you often have trouble when sending faxes,
this feature allows you to hear connecting tones:
fax tone, ring back tone and busy tone. You can
use those tones to confirm the status of the other
party’s machine.
{
1
}
“
ON
”
(default): You will hear connecting
tones.
{
2
}
“
OFF
”
: Deactivates this feature.
Note:
L
If the ring back tone continues, the other
party’s machine may not be a fax machine or
may have run out of paper. Check with the
other party.
L
The connecting tone volume cannot be
adjusted.
LINE 1:
{#}{
7
}{
7
}{*}
LINE 2:
{#}{
7
}{
7
}{#}
Changing the receiving mode in the AUTO
ANSWER setting
{
1
}
“
TAM/FAX
”
(default): Telephone Answering
Machine/Fax mode (page 59)
{
2
}
“
FAX ONLY
”
: Fax only mode (page 60)
{
3
}
“
TAM ONLY
”
: Telephone Answering
Machine only mode (page 61)
Note:
L
When the unit is set to TAM ONLY mode,
friendly reception (feature #46
*
and feature
#46# on page 82) will turn OFF automatically.
When you change the unit from TAM ONLY
mode to TAM/FAX mode or FAX ONLY mode,
friendly reception will be turned ON
automatically.
{#}{
8
}{
0
}
Resetting advanced features to
their default settings
{
1
}
“
YES
”
{
2
}
“
NO
”
(default)
To reset the advanced features:
1.
Press
{
MENU
}
.
2.
Press
{#}
, then
{
8
}{
0
}
.
FG6550-PFQX2225ZA-en.book Page 83 Monday, August 8, 2005 8:16 PM
