10. Help
101
For assistance, please visit http://www.panasonic.com/consumersupport
The handset does not
ring.
L
The ringer volume is set to OFF. Adjust it (page 28).
L
If more than one other user is using the handsets and base unit,
the handset/base unit may not ring. Those users will hear incoming
call tones (feature #73 on page 83, feature 13 on page 88 or
feature 0
*
2 on page 90).
The display shows “
No
link to base. Move
closer to base and
try again.
” and an
alarm tone sounds.
L
The handset is too far from the base unit.
Move closer and try again.
L
Plug in the base unit’s power cord.
L
Raise the base unit antennas.
Static, sound cuts in/out,
fades. Interference from
other electrical units.
L
Move the handset and the base unit away from other electrical
appliances.
L
Move closer to the base unit.
L
Raise the base unit antennas.
L
Turn ON the clarity booster feature (page 35).
The handset stops
working while being used.
L
Place the handset on the charger, and disconnect the power cord
to reset the unit. Connect the power cord, and try again.
I cannot store an item in
the phone book.
L
You cannot store an item in the phone book while the handset is in
the talk, speakerphone, intercom, room monitor or remote
operation mode.
L
Do not pause for over 1 minute while storing.
While storing an item in
the phone book, the
handset starts to ring.
L
To answer a call, press
{
TALK
}
,
{
SP-PHONE
}
,
{
LINE1
}
(soft key)
or
{
LINE2
}
(soft key). Storing will be canceled. Store the name and
number again.
I cannot redial by
pressing
{
REDIAL/PAUSE
}
.
L
If the last number dialed was more than 48 digits long, the number
will not be redialed correctly.
L
The last number dialed may have been a remote function.
“
Recharge battery
” is
displayed,
0688754
flashes or the handset
beeps intermittently.
L
Fully charge the battery (page 23).
“
Charge for 6 HRS
” and
68885
are displayed and
the handset does not
work.
L
The battery has been discharged. Fully charge the battery (page
23).
I charged the battery fully,
but “
Recharge battery
”
is still displayed and/or
0688754
continues to
flash, or “
Charge for 6
HRS
” and
68885
are
displayed.
L
Clean the charge contacts and charge again (page 23).
L
The battery may need to be replaced (page 18). If you install a new
battery, fully charge it (page 23).
The [CHARGE] indicator
does not go out after the
battery has been charged.
L
This is normal.
Problem
Cause & Solution
FG6550-PFQX2225ZA-en.book Page 101 Monday, August 8, 2005 8:16 PM