4. Fax
57
4.4.3 Erasing a stored item from
the broadcast memory
1
Press
{>}
.
2
Press
{A}
or
{B}
repeatedly to display
“
<BROADCAST>
”
.
3
Press
{
MENU
}
.
4
Press
{#}
.
5
Press
{A}
or
{B}
repeatedly to display the
desired item you want to erase.
L
To cancel erasing, press
{
STOP
}
.
6
Press
{
SET
}
.
7
Press
{
SET
}
.
L
To erase other items, repeat steps 5 to 7.
8
Press
{
STOP
}
.
4.4.4 Sending the same
document to pre-programmed
parties
1
Insert the document FACE DOWN.
2
If necessary, press
{A}
or
{B}
repeatedly to
select the desired resolution (page 54).
3
Press
{>}
.
4
Press
{A}
or
{B}
repeatedly to display
“
<BROADCAST>
”
.
5
Press
{
START
}
.
L
An available line is automatically selected
and
{
LINE1
}
or
{
LINE2
}
will light. To
change the line selection, see feature #38
on page 81.
L
The document will be fed into the unit and
scanned into memory. The unit will then
send the data to each party, calling each
number sequentially.
L
After transmission, the stored document
will be erased from memory
automatically, and the unit will
automatically print a report (
Broadcast
sending report
).
Note:
L
If you select
“
FINE
”
,
“
SUPER FINE
”
or
“
PHOTO
”
resolution, the number of pages
that the unit can send will decrease.
L
If the document exceeds the memory
capacity, transmission will be canceled.
L
If a party is busy or does not answer, it will be
skipped and redialed later 1 time.
To send the same document to a one-time
group of items
You can also select a one-time group of parties
to send the same document to. After
transmission, this group will be deleted.
1.
Insert the document.
2.
Press
{>}
.
3.
Press
{A}
or
{B}
repeatedly to display
“
<ONE TIME BROAD>
”
.
4.
Press
{
SET
}
to start programming the
parties you want to send the document to.
5.
Press
{A}
or
{B}
repeatedly to display the
desired party.
6.
Press
{
SET
}
.
L
If you program the wrong item, press
{
STOP
}
to erase the item.
L
To program other parties, repeat steps 5
and 6 (up to 20 items).
7.
Press
{
START
}
to start transmission to the
programmed parties.
L
An available line is automatically selected
and
{
LINE1
}
or
{
LINE2
}
will light. To
change the line selection, see feature #38
on page 81.
To cancel broadcast transmission
1.
Press
{
STOP
}
while
“
BROADCASTING
”
is
displayed.
L
The display will show
“
SEND
CANCELED?
”
.
2.
Press
{
SET
}
.
FG6550-PFQX2225ZA-en.book Page 57 Monday, August 8, 2005 8:16 PM
