![background image](http://html.mh-extra.com/html/panasonic/k-src14/k-src14_manual_276364023.webp)
23
Rev.1.1
●
When using a wall
When installing the receiver and cables in a removable wall, follow the instructions shown below.
1 The mount bracket is fixed to a wall with a driver using a screw.
Note:
•
Fix this unit firmly with specified torque with a tool such as a torque driver.
2 Connect the necessary cables to the receiver.
Connect the cables refer to Connections.
3 Install the receiver.
A receiver is hooked on the hook of the mount bracket.
(
Four places
)
Open the screw cover.
A receiver is fixed to mount bracket with a driver using an attached screw.
Close the screw cover.
Note:
•
Fix this unit firmly with specified torque with a tool such as a torque driver.
4 After installation, check that all parts are firmly installed.
Check visually for loose parts and connections.