![background image](http://html.mh-extra.com/html/panasonic/k-src14/k-src14_manual_276364008.webp)
8
Rev.1.1
Operating procedures
1.
A standard CAT5 or CAT5e cable is used to connect to the amplifier
,.
A
fter that, turned on amplifier.
The POWER LED of the receiver lights green.
2. Power ON of the microphone .
[K-STD14] : Turn on the [PWR/MUTE] button.
[K-SHH14] : Turn on the [
PWR
LINK] button. And Push [TALK push]button.
The MIC1 or MIC2 LED indicator of the lights green ( depending on a channel to be received.)
3 .Adjust the volume of external devices such as an amplifier.
The overall volume is adjusted with the external amplifier or the like. Use of the volume button of K-STD14 allows the volume of
itself to be adjusted. In addition, selection of the target with the selection button of K-STD14 allows the volume of the other
microphone received by this unit and the volume of LINE IN of this unit to be adjusted.
4. The LED of the POWER/MIC1/MIC2 indicates the operating state of this unit during operation.
LED
POWER
indicator
MIC1/MIC2 indicator
E2 signal output provided*
Lighting red
Lighting red
(lighting green at E2 ACK input provided)
E1 signal output provided*
Lighting green
Lighting red (for 300 ms)
Page mute signal input provided
Lighting yellow
Lighting yellow
Microphone volume operated*
Lighting green
No lighting (for 300 ms)
Feedback blocker operated
Lighting green
Lighting yellow (for 5 s)
Audio link establishment
Lighting green
Lighting green
* Applicable when K-STD14 is used
5. The LED of the LINK indicates the operating state of this unit during operation.