![background image](http://html.mh-extra.com/html/panasonic/k-src14/k-src14_manual_276364014.webp)
14
Rev.1.1
LED lighting indication1[POWER/MIC1/MIC2]
Three LEDs of this unit operate as an operation indicator indicating the state in operation and as a reception indicator indicating the
receiving state of the microphone under normal conditions. In addition to those above, the LEDs operate as an indication LED
indicating the operating state of this unit. Those LEDs indicate operating states as shown in the table.
Furthermore, the priority order of indications is dependent on operating states.
*1 E1 and E2 signal outputs and operating the volume button are available only with the microphone, K-STD14.
*2 The indicator lights green again 3 minutes after the E2 signal is turned off with the microphone, K-STD14
LED Indication 2 [LINK LED]
LINK LED is normally off.
When an LINK key is pressed, the LINK LED blinks
yellow at 20s.(ID registration/pairing mode)
・
LED color will change according to priority. Show in below
* If there is no special mention, when a function is completed or time passed, the LED state is restored to before changing.
Indication
priority
Operating state
LED indication
MIC1
POWER
MIC2
1
(highest)
E2 signal output
provided*1
Red
(Lighting green at E2
ACK input provided)
Red
*2
(Lighting
green at
Power OFF)
Red
(Lighting green at E2
ACK input provided)
2
Paging mute signal
input
Yellow
Yellow
Yellow
3
E1
signal output
provided*1
Red
(Lighting for 300 ms)
Green
Red
(Lighting for 300 ms)
4
Microphone volume
button operated*1
No lighting
(No lighting for 300 ms
at operating volume
button)
Green
No lighting
(No lighting for 300 ms
at operating volume
button)
5
Feedback blocker
operated
Yellow
(Lighting for 5s)
Green
Yellow
(Lighting for 5s)
6
Audio
link
establishment
Green
Green
Green
7
(lowest)
Power ON
No lighting
Green
No lighting
Status
LED indication
LINK
System error
Red
During ID registration/ pairing
Blink yellow at
20s
period
A
udio link establishment with the DECT AP
Green
Power ON
No lighting