![background image](http://html.mh-extra.com/html/panasonic/k-src14/k-src14_manual_276364029.webp)
29
Rev.1.1
hexadecimal
form.
Response
None
None
$CMI:11H,22H,33H,44H,55H: 12H,23H,34H,56H, 78H
[CR][LF]
ALM
Alert
Change
notification
Refer to (*1)
Refer to (*1)
$ALM: 11H,22H,33H,44H,55H: 12H,23H,34H,56H,
78H:1:63[CR][LF]
ALB
Alert message
from alert Button
Change
notification
Microphone (DECT
ID)
DECT ID (20 bits)
is specified by the
character string (5
bytes) of a
hexadecimal form.
None
$
ALB
:23456[CR][LF]
RAL
Release Alert
Setting
None
None
$RAL[CR][LF]
Response
None
None
$RAL[CR][LF]
ALL
Alert message
Location
Change
notification
The number of
alert messages N
(N=1-5
)
(Parameter
2 -6)
RF signal
strength: 0-63
is specified by
the character
string (2 bytes)
of a
hexadecimal
form.
$
ALL
:2:12345:23456:1:34:12345:78910:0:20[CR][LF]
CAA
Change
Microphone's
transmission area
for audio
Setting
The threshold level
of the signal
strength of RCV
for making a
microphone mute
0:Default
1: Area1
2: Area2
3: Area3
-
$SAA:1[CR][LF]
*An area of default setting is same as an area of
“RF Tx power setting” of DIP SWITCHES.
Default > Area1 > Area2 > Area3
Each QDS response command returns not the physical ON/OFF status of the DIP switch but the current setting status
(*1) Parameter of ALM command.
Parameter
Content
Comment
Parameter1
Alert information
Microphone (DECT ID)
DET ID (20 bits) is specified by the
character string (5 bytes) of a
hexadecimal form.
Parameter2
Receiver /DECT AP (DECT ID)
DECT ID (20 bits) is specified by the
character string (5 bytes) of a
hexadecimal form.
Parameter3
Paring status bit:
0 = not paired, 1 = paired
The connection state of Microphone and
Receiver before activating an Alert.
Parameter4
RF signal strength: 0-63 is specified by
the character string (2 bytes) of a
hexadecimal form.
It is a linear value showing signal strength.