English
En-7
1. There are six shelf supports to be fitted. Each support should be located into its
corresponding set of slots as shown. When fitting the supports, the arrow marked on
the shelf support should point towards the front of the oven. Please note the
following part numbers are printed on the back side of the individual supports.
E22926Y5BP (X 1)
Right back
2. Fully insert the locating pegs into
the front slots as shown. When
fitting the supports, the arrows on
them should point towards the
front of the oven. The arrow
refers to the front of the support.
3. Push the support back as shown
so that the rear pegs locate into
the rear slots.
E22916Y5BP (X 1)
Right middle
E22906Y5BP (X 2)
Left back & middle
E22936Y5BP (X 2)
Right & left front
Attaching Shelf Supports