If stains or dirt become attached to the sensor head surfaces, wipe them with a lint-free soft
cloth or lens cleaning paper. If the surfaces are very dirty, wipe off dirt using a cotton swab
(or similar material) moistened with absolute alcohol.
● Do not allow ambient light such as sunlight to directly hit the light receiving section of the
sensor head. In particular, if precision is required, use this product by mounting a douser (or
similar material) on the sensor head.
● When a measured object with a strong specular reflection component (such as glass or
specular reflector) is detected, it may not be detected correctly due to the influences of light
reflected from the measured object. In such a case, install a pair of emitter and receiver at a
certain angle so that reflected light does not hit the emitter or receiver. After adjusting the
angle, always check the beam axis. After checking the beam axis, if the beam axis is
aligned, register the reference waveform. If the beam axis is misaligned, readjust the beam
axis, and register the reference waveform.
● Avoid using this product in environments where condensation occurs due to sudden
temperature change.
● Avoid dust, dirt, and steam.
● Avoid using the product in atmospheres that contain corrosive or other harmful gases.
● Ensure that the product does not come into contact with organic solvents such as thinner.
● Ensure that the product does not come into contact with strong acid or alkaline.
● Ensure that the product does not come into contact with oil or grease.
● This product cannot be used in an environment that contains flammable or explosive gases.
● Performance may not be satisfactory in a strong electromagnetic field.
● Do not use this product in locations subject to severe vibration or shock.
● This product is a precision device. Do not drop or otherwise subject to shock. Risk of
product damage.
● Take care not to touch any terminals in the connector or allow foreign objects to enter the
connector.
● The sensor head is watertight, but the connectors are not structurally resistant to dust,
water or corrosion. Therefore, the HG-T series cannot be submerged in water or placed
under falling water for measurement operation. Pay attention to the environment where the
product is used.
Other matters
● Never attempt to disassemble, repair, or modify the product.
● When the product becomes unusable or unneeded, dispose the product appropriately as
industrial waste.
1.2 Handling Precautions
1-4
WUME-HGT-6
Содержание HG-T Series
