Panasonic Firetracker FT1020G3 CIE, Руководство по эксплуатации

Страница: 18 / 180

18
Operation Manual
FT1020G3 Rev 2.10.4
•
Main board 5012, see Figure 9 page 30.

4 x COM loops (0-3) to which the loop units are connected, refer to Figure
24 page 176.

4 x programmable supervised voltage outputs (S0-S3), refer to Figure 24
page 176.

2 x programmable relay outputs (R0-R1), refer to Figure 24 page 176.

4 x programmable supervised / non-supervised inputs (I0-I3), refer to Figure
24 page 176.

6 x 24 V DC outputs (power supply outputs for Web-server / Gateway, ASE
and external equipment), refer to Figure 24 page 176.

2 x non-programmable relay outputs for ASE, Fire brigade tx (alarm) and
Fault tx (fault). Fault relay is normally energised, see Figure 24 page 176..

Space & connectors for two TLON connection boards (5090).

RS485 and 24 V
DC
outputs for Display Units, refer to Figure 24 page 176.

Connector for expansion boards (4580 & 4581), refer to Figure 24 page 176.

Connectors for Web-server / Gateway, refer to Figure 24 page 176.

Connectors for power supply and batteries, refer to Figure 24 page 176..
• Power supply, refer to Figure 24 page 176.

Switch mode power supply, 230 V
AC
/ 24 V
DC
(LS150-24).

Space and connection cables for two Sealed Lead-Acid backup batteries.
Optional 6U height battery box is available for additional batteries.

Battery temperature sensor.
•
Space for up to six expansion boards 458x.
Note
: Some drawings shown in Chapter 34 page 173, others are shown in a separate
drawing document
3.4 Front Display
Figure 3 FT1020G3 front display
P1
P2
P3
P4
P5 - P8
L1
L2
L3
L4
L5
L6
L7,L8
L11,L12
L9,L10
L13,L14
P9