Panasonic Firetracker FT1020G3 CIE, Руководство по эксплуатации

Страница: 144 / 180

144
Operation Manual
FT1020G3 Rev 2.10.4
"  |"
Set base station mode
Set base station ------- to Register
Unregister
Install
-- Base station mode (1) -------------------------------------------
Register, base station 000001
Select a Base station in the
list and press "
↲
" to go
from Register mode back to
Normal state. The Base
station will disappear from
the list, indicated with a
beep.
"
↲
"
Set base station mode
Set base station ------- to Register
Unregister
Install
The same procedure is
valid for the Unregister and
Install modes.
Press "ESC" to go back
to menu "A8".
"ESC". A8 Setup wireless detector Scroll to another menu or
press "ESC".
Note: The base station must be set back to the "Normal state" for the wireless detectors to
function normally.