2
Ŷ
“Airflow for cleaning” cleans dust in the air
during absence. (P.38)
Reduces dust that falls to the floor by approximately
70%
*
2
(It cannot clean dust that has already built up.)
*2 Product operated while placed next to the wall of an approximately
23 m
3
test room. Dust is generated in the center of the room, and the
weight of dust adhered to the nanofiber HEPA filter after 1 hour is
measured and used to calculate the weight of dust falling on the floor.
Comparison of weight of generated dust and weight of dust falling on
the floor.
Operating in “Absence cleaning” mode with no people present.
Evaluated by the test method of Panasonic own. These values are a
guided only, the effect is different depending on the installation
environment and the usage.
Ŷ
“ECONAVI” operation makes electric utility
expense cheaper.
It saves power by stopping operation automatically
when the air is clean. Meanwhile, the product will
operate in advance to eliminate the dirt effectively
before spreading, thus reducing the operation time.
Ŷ
A presence sensor pre-starts operation and collects dust quickly to prevent dirt from spreading
around the room
Ŷ
Equipped with nanoe™ technology
“Mega catcher” and humidifying function
bring clean and moisturizing air.
Ŷ
Measure against PM2.5
&DWFKHVRIWKHSDUWLFOHVKDYLQJDVL]HRIWRȝP
1
New particles coming from the outdoor by ventilation etc. are not calculated.
*1 Test method: Japan Electrical Manufacturers' Association voluntary
standard (HD-128)
Criteria: The time to remove 99 % of the particles having a size of 0.1
WRȝPLQDFORVHGVSDFHRIP
3
is within 90 minutes.
(It is a value converted for the test space of 32 m
3
.)
Ɣ
30LVDJHQHULFWHUPIRUILQHSDUWLFXODWHPDWWHUVKDYLQJDVL]HRIȝP
or less.
Ɣ
It has not been confirmed that this product removes fine particulate matter
RIOHVVWKDQȝP,QDGGLWLRQLWLVQRWPHQWLRQHGWKDWWKLVSURGXFW
removes all of the harmful substances in the air.
Ɣ
The result is of a test in closed space of 32 m
3
, instead of in actual
application space.
Throughout the room
Odor, smoke
Airflow for
odor, smoke
Near the floor
House dust
such as
Airflow for
house dust
(dead bodies and excreta)
mites, dust
and
other
Ŷ
About “Mega catcher”
The sensor detects dirt in the air (P.36), which
causes the front panel to open widely to suit the
type and concentration of dirt in the air, and
product will operate with appropriate airflow.
(P.38 Type of airflow)
Ŷ
About “Light sensor mode”
The product detects the indoor brightness with the
light sensor and controls the brightness of indicators
or the front indication of the control panel and air
volume automatically. (P.40)
Ŷ
Sensors identify dirt in the air, and the front panel opens widely to suck in air intensively from
the bottom
Ŷ
“Clothes refresh” operation deodorizes the
clothes difficult to wash.*
3
The deodorizing effect differs according to the surrounding environment
(temperature / humidity), operation time, or type of odor / textile.
*3 Testing organization: ENVIRONMENTAL CONTROL CENTER CO., LTD.
Test method: Conduct verification using six grades odor
intensity measurement method. Located 40 cm
away from the air outlet in the test chamber of
23 m
3
.
Deodorizing method: Emitting nanoe™ in “Clothes refresh” operation
Target: Attached cigarette odor, barbecue odor
Test outcome: <cigarette odor> odor intensity drops 2 grades
within 60 minutes. [H117249002000DA]
<barbecue odor> odor intensity drops 1 grade
within 60 minutes. [H117249002001DA]
Ŷ
About “Sandstorm”
“Sandstorm” mode provides powerful suction with
an optimal airflow for removing sand dust. (P.38)
Sand dust
Airflow for
sand dust
Ŷ
“Sandstorm” mode provides intensive suction of sand dust using sensors and optimal airflow
Ŷ
Adoption of new nanofiber HEPA filter
VXL95M_EN-ARA.indd 2
10/15/2015 5:47:35 PM
