24
Child Lock
Timer
(Press for approximately
3 seconds.)
(The indicator is lit.)
To prevent the product
from mischief operation by
children.
Pressing any button after
setting the timer emits a
“beep beep” warning
sound, and you cannot
operate.
Ŷ
To cancel
Press for approximately 3 seconds again.
(The indicator is turned off.)
(The indicator is lit.)
Each press of the
button will switch the
air volume setting.
The product stops operating
automatically after 2 hours,
4 hours or 8 hours (Sleep
mode).
Ɣ
With the 8 hour timer (Sleep
PRGHWKH$LUYROXPHLV
set to [Lo], the front
indication turns off, and the
control panel indicator turns
half on.
Ŷ
To cancel
Press the
until it is released (The
indicator is turned off.).
Note
Ɣ
If the 8 hour timer (Sleep mode) has been set, the
operating mode cannot be changed.
Operate in Sandstorm mode
(The indicator is lit.)
Intensively removing sand dust
This mode heightens the sensitivity of the sensor and operates automatically using a
powerful air volume.
Ŷ
To cancel
Press
again. (The indicator is turned off.)
Note
Ɣ
:KHQ6DQGVWRUPLVRSHUDWHGXPLGLILFDWLRQVHWWLQJDW>+L@RU>/R@WKH+XPLGLILFDWLRQVHWWLQJ
will switch to [Med]. (See P.20 *2 of “Set humidification”)
Ɣ
Even when the room air is clean, once every 60 minutes the product will run for 5 minutes using a strong air
volume in order to check dust in the air.
Sandstorm / Timer /
Child Lock
Operating methods
VXL95M_EN-ARA.indd 24
10/15/2015 5:47:42 PM
