16
3
Install the front panel.
* Be sure to attach the front
panel before use.
Fill the tank with water
Turn on
5
Connect the power
plug.
(Wipe the water off the
power plug and your
hands before inserting it.)
Ɣ
Inserting the power plug turns on
the humidity indicator (P.12).
The indicator alternates between
indicating the general level of the
current humidity.
Ɣ
Press
, and the
clean sign (P.12) blinks blue or
red for about 5 seconds. The odor
sensor takes this moment as the
baseline for the level of cleanliness,
so it is recommended when the air
in the room is clean (such as when
there is no cigarette smoke). (The
odor sensor baseline is updated
automatically depending on the
level of cleanliness in the room.)
4
Remove the tank, fill
it with water, and
install it back.
Ɣ
Be sure to disconnect the
power plug.
(Not required when
humidification is not used.)
Press the hook to remove the tank,
and remove the cap.
Press the
hook.
Tank
Flip the tank upside down when filling
with water or returning the tank.
Fill with water.
The tank can be supported
using the tank stand.
(Rotate the tank stand.)
Guide of full
capacity
Firmly tighten the cap.
Ɣ
Hold the tank firmly to
prevent it from toppling over.
Return the tank to the product.
Press until the
tank makes a
“clicking”
sound.
Ŷ
Be sure to use the tap water
(This is because tap water is normally
chlorine-disinfected to prevent breeding of
bacteria.)
Ɣ
Do not use the following water:
Ɣ
Warm water that is 40
°C or more, or water
that contains detergent.
(Otherwise, deformation or failure may occur.)
Ɣ
Water mixed with chemicals, air
fresheners, or essential oil.
(It may damage the tank and cause
VSLOODJHRUZHWWKHIXUQLWXUHĺ3
Ɣ
Water from water purifier, ionized alkaline
water and well water.
(It may cause mold or bacteria.)
Attention
Ɣ
If you have to use the well water
(drinkable), please maintain and clean
the tray, the humidifying filter set, the
ion sterilization unit (anti-fungus agent
containing) more frequently.
Ŷ
Continuous operation time of a
tank of water
Ɣ
Operates for about 4.6 hours. (When the
product is operating with “Air volume”
set to [Hi], and the room temperature is
20 °C and humidity is 30%)
Preparation
VXL95M_EN-ARA.indd 16
10/15/2015 5:47:40 PM
