Panasonic EVERVOLT EVHB-I7, Инструкция по установке и эксплуатации

Страница: 3 / 43

Notes on this Manual
1
This manual is an integral part of the EVHB-I7 inverter. It describes the
assembly, installation, commissioning, maintenance and failure of the
product. Please read it carefully before operating.
1 Note on this Manual 7 INVERTER OPERATION METHOD............................................................
7.1 CHECK BEFORE TURN ON THE SYSTEM......................................
7.2 TURN ON THE SYSTEM...................................................................
7.3 SHUT DOWN THE SYSTEM.............................................................
8 FIRMWARE UPGRADING.........................................................................
8.1 PREPARATION.................................................................................
8.2 UPGRADING STEPS........................................................................
9 TROUBLESHOOTING...............................................................................
11 DECOMMISSIONING................................................................................
62
62
62
64
66
66
66
68
74
11.1
TROUBLE SHOOTING.....................................................................
11.2 ROUTINE MAINTENANCE..............................................................
74
74
74
12 DISCLAIMER........................................................................................... 75
10 MAINTENANCE........................................................................................73
* APPENDIX A: EPO CONNECTION STEPS
* APPENDIX B: METER Y CONNECTION STEPS
WARNING!
Save these instructions-This manual contains important
instructions that shall be followed during installation and
maintenance of the unit.
EVHB-I7
Note: “EVERVOLT Hybrid Inverter ”series means PV grid-supported storage
inverter.
The assembly, installation, commissioning and maintenance in this manual
will take EVERVOLT Hybrid series inverter as an example.
EVERVOLT Hybrid Inverter
1.1 Scope of Validity
This manual is for qualified electricians. The tasks described in this manual
should only be performed by qualified electricians.
The following types of safety instructions and general information
appearing in this document are described below:
1.2 Target Group
1.3 Symbols Used
Store this manual where it will be accessible at all times.
7.4 DEFINITION OF INDICATOR LIGHT AND BUTTON........................64
* APPENDIX C: SYSTEM WIRING DIAGRAM
* WARRANTY REGISTRATION FORM
11.3 STORAGE AND TRANSPORTATION...............................................
11.4 DISPOSAL OF INVERTER............................................................... 74