Panasonic EVERVOLT EVHB-I7, Инструкция по установке и эксплуатации

Страница: 40 / 43

11 Decommissioning
11.1 Remove the Inverter
1. Disconnect the inverter from DC Input, AC output, Smart Box and battery.
2. Wait for 5 minutes for de-energizing.
3. Disconnect communication and optional connection wires.
4. Remove the inverter from the wall bracket.
5. Remove the bracket if necessary.
If possible, always pack the inverter in its original carton and secure it with tension
belts. If the original package is no longer available, you can also use an equivalent
carton that meets the following requirements;
Ÿ Suitable for the weight of product.
Ÿ Easy to carry.
Ÿ
B e capable of being closed completely
Store the inverter in a dry environment where ambient temperature stays between
-
13
℉
/-25°C ~ 167
℉
/75°C. Take care of the inverter during the storage and
transportation, keep less than 5 cartons in one stack.
Do not dispose of faulty inverters or accessories together with household
waste. Please accordance with the disposal regulations for electronic waste
which is appl ied at the installation site at that time.
11.2 Packaging
11.3 Storage and Transportation
Decommissioning
The inverters shall be transported, used and operated under restricted conditions.
Panasonic will not provide any service, technical support or compensation in case
of the following circumstances, including but not limited to:
12 Disclaimer
Disclaimer
75
74
Ÿ
The inverter is damaged by force majeure (such as earthquake, flooding,
thunderstorm, lighting, fire hazard, volcanic eruption, etc.);
Ÿ
The inverter's warranty is expired, but not extended;
Ÿ
The inverter's SN, warranty card or invoice cannot be provided;
Ÿ
The inverter is damaged by man-made cause;
Ÿ
The inverter is used or operated against any items in local policy;
Ÿ
The installation, configuration and commissioning of the inverter doesn't
meet the requirements mentioned in this manual;
Ÿ
The inverter is installed, refitted or operated in improper ways;
Ÿ
The inverter is installed, operated under improper environment or
electrical condition;
Ÿ
The inverter is changed, updated or disassembled on hardware or
software without authority from Panasonic;
Ÿ
The communication protocol from other illegal channels is used; and
Ÿ
The monitoring or control system is used without authority from
Panasonic.
Panasonic reserves the right for the final explanation.
11.4 Disposal of Inverter