![Panasonic EB-GD35 Скачать руководство пользователя страница 34](http://html.mh-extra.com/html/panasonic/eb-gd35/eb-gd35_service-manual_261858034.webp)
http://cxema.ru
EB-GD35 EB-GD35C
34
3.
On the PC, select NORMAL MODE and press ENTER.
4.
Press Shift F10 on the PC.
5.
After approximately 1 second, set the ExtPwr switch to ON until the unit powers up.
Entering Call Mode from Test Mode
The screen of the PC should resemble the one shown below:
Figure 6.6: PC Screen (SCRN11)
1.
At the PC, change the SOFT SIM field to read <ENABLE>. Press ENTER.
2.
At the PC, change the TEST MODE field to read <TERM>. Press ENTER.
The UUT will power down and up again. If the UUT is connected to a GSM test set, after a delay of approximately five seconds,
the UUT will register service.
To return to test mode, set the SOFT SIM field to <DISABLE> and set the TEST MODE field to <TEST>. Press Enter.
Channel Box software loaded and the screen indication as follows
PC Screen (SCRN9)
Содержание EB-GD35
