Panasonic EB-GD35 Скачать руководство пользователя страница 3 | Manualshive

Страница: 3 / 66

background image

http://cxema.ru

EB-GD35 EB-GD35C

3

1

INTRODUCTION

INTRODUCTION

INTRODUCTION

INTRODUCTION

1.1.

Purpose of the Manual

This Service Manual contains the information and procedures required for installing, operating and servicing the Panasonic GSM
Personal Cellular Mobile Telephone system operating on the GSM Digital Cellular Network.

1.2.

Structure of the Manual

The manual is structured to provide service engineering personnel with the following information and procedures:
1.

General and technical information - provides a basic understanding of the equipment, kits and options, together with detailed
information for each of the major component parts.

2.

Installation and operating information - provides instructions for unpacking, installing and operating the equipment.

3.

Servicing information - provides complete instructions for the testing, disassembly, repair and reassembly of each major
component part. Step-by-step troubleshooting information is given to enable the isolation and identification of a malfunction, and
thus determine what corrective action should be taken. The test information enables verification of the integrity of the equipment
after any remedial action has been carried out.

4.

Illustrated parts list - provided to enable the identification of all equipment components, for the ordering of spare / replacement
parts.

1.3.

Servicing Responsibilities

The procedures described in this manual must be performed by qualified service engineering personnel, at an authorised service
centre.
The service engineering personnel are responsible for fault diagnosis and repair of all equipment described in this manual.

WARNING

The equipment described in this manual contains polarised capacitors utilising liquid electrolyte. These devices are entirely safe provided
that neither a short-circuit nor a reverse polarity connection is made across the capacitor terminals. FAILURE TO OBSERVE THIS
WARNING COULD RESULT IN DAMAGE TO THE EQUIPMENT OR, AT WORST, POSSIBLE INJURY TO PERSONNEL RESULTING
FROM ELECTRIC SHOCK OR THE AFFECTED CAPACITOR EXPLODING. EXTREME CARE MUST BE EXERCISED AT ALL TIMES
WHEN HANDLING THESE DEVICES.

Caution

The equipment described in this manual contains electrostatic devices (ESDs). Damage can occur to these devices if the handling
procedures described in Section 4 are not adhered to.

Caution

This equipment may contain an internal battery in addition to the external battery packs. These batteries are recyclable and should be
disposed of in accordance with local legislation. They must not be incinerated, or disposed of as ordinary rubbish.

«
1
2
3
4
5
...
»

Содержание EB-GD35



































































Отзывы:

Нет отзывов

Похожие инструкции для EB-GD35

Бренд: Pantech Страницы: 101

Бренд: Handspring Страницы: 2

Бренд: Alcatel Страницы: 96

Бренд: Rath Страницы: 8

Бренд: Docomo Страницы: 469

Бренд: Archos Страницы: 40

Бренд: Manta Страницы: 28

Бренд: Yezz Страницы: 29

Бренд: Aastra Страницы: 96

Бренд: Konftel Страницы: 8

Бренд: ShoreTel Страницы: 2

Бренд: Audiovox Страницы: 70

Бренд: Alcatel Страницы: 6

Бренд: OfficeServ Страницы: 38

Бренд: Billow Страницы: 102

Бренд: IPRO Страницы: 32

Бренд: Mitsubishi Electric Страницы: 32

Бренд: Splicecom Страницы: 32

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды