T
ro
uble
s
ho
oting
VQT3F56
82
Troubleshooting guide
Before requesting service, make the following checks. If
the problem still persists, consult your dealer for
instructions.
Updating to the latest software (firmware) may solve the
problem. (
>
78)
∫
The unit doesn’t work.
One of the unit’s safety devices may have been
activated.
Reset the unit as follows:
1
Press [
Í
/I] on the main unit to switch the unit to
standby.
≥
If the unit doesn’t switch to standby, press [
Í
/I] on
the main unit for about 3 seconds. The unit is
forcibly switched to standby.
Alternatively, disconnect the AC mains lead, wait
one minute, then reconnect it.
2
Press [
Í
/I] on the main unit to switch it on. If the unit
still cannot be operated, consult the dealer.
∫
Cannot eject disc.
The unit may have a problem. While the unit is off, press
and hold [
∫
] and [CH
W
]
on the main unit at the same
time for about 5 seconds.
The unit is turned off automatically.
¾
If you connected this unit to a “HDAVI Control”
compatible TV with an HDMI cable, this unit will be
automatically set to standby mode when the TV is set to
standby mode.
The display is dim.
¾
Change “Unit’s Display”. (
>
73)
“0:00” is flashing on the unit’s display.
¾
Set the clock. (
>
76)
The time recorded on the disc and the
available time shown do not add up.
¾
If you record or edit about 200 times or more, the
remaining capacity of DVD-R, DVD-R DL, +R, and
+R DL is reduced and then recording or editing may be
disabled (for the second layer on DVD-R DL and +R DL,
this happens after about 60 times).
¾
While searching, the elapsed time may not display
correctly.
¾
Available disc space display may be different from actual.
Varying may be large especially when recorded in DR
mode.
The clock does not display on the unit when
switched to standby.
¾
The clock does not display when “Power Save in
Standby” is activated. Ensure “Power Save in Standby” is
set to “Off”. (
>
76)
The following do not indicate a problem with this unit:
≥
Regular disc rotating sounds or louder rotating sounds
when recording or high speed copying.
≥
Poor reception due to atmospheric conditions.
≥
Image disturbance during search.
≥
Interruptions in reception due to periodic terrestrial
broadcasting breaks.
≥
When the unit is turned on or off, there may be an
unexpected sound. This does not indicate a problem
with this unit.
Power
Displays
DMRXW385GL-VQT3F56_eng.book 82 ページ ２０１１年２月８日 火曜日 午後４時３８分
