Co
nve
n
ien
t func
tions
VQT3F56
78
Software (Firmware) Update
Software of this unit can be updated automatically by
following method in standby mode at the specified time
(Default setting is 3 a.m.
>
77, Software Update in Standby)
≥
From broadcasts
≥
From Internet [network connection and setting is required.
(
>
13, 19)]
≥
The time it takes to update depends on the connection.
– For Broadcast: About 2 to 4 hours
– For Internet: About 1 hour
The download time differs depending on the network
environment.
∫
If a software (firmware) update is
available, a notification is displayed.
≥
It is displayed on the channel information (
>
20) when
the Software (Firmware) can be updated immediately.
To execute, push the “Red” button while the channel
information is displayed, and follow the instructions on
the screen.
≥
Update of the software (firmware) will start when the power
is turned off.
∫
The unit’s display during the update
e.g.,
≥
When “FINISH” is displayed, update of the software
(firmware) has completed.
≥
If the timer recording is scheduled within the following time at the start of
the download, the download will not be executed.
– For broadcast: Within 4 hours
– For Internet: Within 1 hour
≥
You can also download the latest software (firmware) from the following
website and burn it to a CD-R to update the software (firmware).
http://panasonic.jp/support/global/cs/
≥
If you do not want to perform the software (firmware) update, set the
“Software Update in Standby” in the Setup menu to “Off”. (
>
77)
New software version has been found.
The software will be updated automatically
after this unit is switched to standby.
Do not disconnect the AC mains lead.
1
All Digital Channels
10:30
Select favourites
Dogs and Cats
9:00 - 11:00
Now
Dolby D
Rating: PG
Software upgrade
You cannot operate the unit until the update is
complete. Removing the AC mains lead while the
update is in progress may damage the unit. Don’t
remove the AC mains lead during the update.
DMRXW385GL-VQT3F56_eng.book 78 ページ 2011年2月8日 火曜日 午後4時38分