T
ro
uble
s
ho
oting
VQT3F56
84
Troubleshooting guide
The remote control doesn’t work.
¾
The remote control and main unit are using different
codes. Change the code on the remote control.
¾
Software (firmware) is updating when “UPD
/
” is
displaying on the unit’s display. Wait until the update is
completed. (
>
78)
¾
The HOLD function is activated. (
>
16)
The unit is on but cannot be operated.
¾
Drive has not been selected properly.
Cannot tune channels.
¾
Check the connections.
“Download from TV” function does not work.
¾
You must connect to a VIERA Link (HDAVI Control 3 or
later) compatible TV with a HDMI cable to download
channel presets. (
>
12)
Startup is slow.
¾
Startup takes time in the following situations:
– A disc is inserted.
– The clock is not set.
– Immediately after a power failure or the AC mains lead
is connected.
– When the unit is connected with an HDMI cable.
– When the “Power Save in Standby” is activated. (
>
76)
Cannot record.
Cannot copy.
¾
Some broadcasts are copyright protected.
¾
You can not record to the disc by pressing the [
¥
REC] or
timer recording.
¾
The disc is protected with “DVD Management” or
“Cartridge-protection”. (
>
8, 64)
¾
[-R]
[-R]DL]
[-RW‹V›]
[+R]
[+R]DL]
[+RW]
Since it will copy to
HDD temporarily, copying is not possible if there is
insufficient available capacity on the HDD.
Delete unnecessary titles on the HDD. (
>
36)
¾
You cannot record and copy on finalised discs.
¾
[-R] [-R]DL] [-RW‹V›] [+R] [+R]DL] [+RW]
Recording or editing
may not be possible on these discs after ejecting and
loading the disc or turning the unit on/off for
approximately 30 times after being recorded to.
¾
Discs recorded on equipment other than this unit may not
be able to be recorded to.
¾
This unit cannot copy NTSC signals to discs that already
have PAL signal recordings.
Play of discs recorded with both PAL and NTSC on
another unit is not guaranteed.
Cannot record from external equipment.
¾
Check that the connection and input channel is correct.
(
>
13, 56)
Timer recording does not work properly.
¾
Refer to “Notes on timer recording”. (
>
27)
A part or whole of a recorded title has been
lost.
¾
If there is a power failure or the AC mains lead is
disconnected from the household mains socket while
recording or editing, the title may be lost or the HDD/disc
may become unusable.
We cannot offer any guarantee regarding lost
programmes or discs.
An unusually loud sound is coming from the
rotating disc.
¾
If you want copy to perform more quietly, select “Normal
( Silent )” in “DVD Speed for High Speed Copy”. (
>
70)
Operation
Press and hold [OK] and the
indicated number button at the
same time for more than
5 seconds. (
>
76)
Unit’s display
Recording, timer recording and
copying
DMRXW385GL-VQT3F56_eng.book 84 ページ ２０１１年２月８日 火曜日 午後４時３８分
