
81
RQT9078
Ref
erence
Inserting Discs
Notes
When using 8 cm DVD-RAM or 8 cm DVD-R, remove the
disc from the cartridge.
It is not possible to record or play continuously from one
side of a double sided disc to the other. You will need to
eject the disc and turn it over.
When the card indicator (“SD”) on the unit’s display is fl ashing, the card
is being read from or written to. Do not turn off the unit or remove the
card.
Such action may result in malfunction or loss of the card’s contents.
Inserting foreign objects can cause a malfunction.
Holding a disc or card
Handle discs by the edges to avoid inadvertently scratching or getting
oil from your fi ngers on the disc. Do not touch the signal surface of
discs (the shiny side) or the terminal surface (the metal part) of SD
cards.
Cleaning discs or cards
Discs are not indestructible and occasionally dirt or condensation
may appear. Clean by gently wiping with a soft, dry lint-free cloth in a
straight line from the centre of the disc to the edge of the disc.
Return discs and SD cards to their cases when not in use; this helps to
protect against scratches and dirt.
Storing discs and cards
Do not place or store discs and cards in the following locations:
–
Direct sunlight
–
Very dusty or humid areas
–
Near a heat source
–
Places that undergo extreme shifts in temperature (condensation
can occur)
–
Where static electricity or electromagnetic waves occur
Keep the Memory Card out of reach of children to prevent
swallowing.
Discs to avoid
Discs that are not perfectly circular in shape
Warped discs, which may not balance properly in your unit, causing
improper operation or damage to the unit
Cracked discs
Discs with exposed adhesive (from removed stickers or labels, such
as may occur with rental discs or improperly cared-for discs that were
previously labeled or re-labeled)
Disc and Card Care
Inserting the card
Removing the card
Press on the centre
of the card.
Pull it straight out.
[RAM]
Use cartridges to protect them from scratches and dirt.
Inserting/Removing the SD Card
[EX88]
Media Handling (Disc/USB Memory/SD Card)
Press [
OPEN/CLOSE] to open the tray.
– Insert a disc.
Press [
OPEN/CLOSE] to close tray.
Insert label-up.
Automatic drive select function
[RAM]
[Only for discs with the write-protect tab on the cartridge set to
“PROTECT” (
68, Setting Protection)]
[DVD-V] [VCD] [CD]
If the unit is recording to the HDD or stopped, it automatically
switches to the DVD drive when a disc is inserted.
If you eject a disc and close the disc tray, the HDD drive is
automatically selected.
Automatic drive select function
If you insert an SD card while the unit is stopped, the “SD Card”
screen is displayed. Select an item and press [OK] to switch to the
SD drive (
38, 62).
If you remove an SD card, the HDD drive is automatically selected.
Insert the card label up with
the cut-off corner on the right.
ADAPTER
Press on the centre of
the card until it clicks into
place.
If you are using a
miniSD card,or a
microSD card, insert
it into the adaptor that
comes with the card.
Insert and remove this
adaptor from the unit.
e.g., miniSD
Inserting/Removing the USB memory
Inserting the USB memory
Before inserting any USB memory to this unit, ensure that the data
stored therein has been backed up.
Check the orientation of the USB connector and insert it straight in.
Insert an USB device while the unit is stopped, so the “USB device”
screen is displayed. Select an item and press [OK] to switch to the
USB-related operations (
38, 62).
Removing the USB memory
Complete all USB-related operations and pull the USB memory
straight out.
If a USB memory being accessed is pulled out, then the data may be
damaged.
DMR-EX78̲88EB.indb 81
DMR-EX78̲88EB.indb 81
2008/02/14 12:19:56
2008/02/14 12:19:56