76
RQT9078
System Settings
FU
NC
TIO
N M
EN
U
(
70, Accessing the Setup menu)
All factory default settings are indicated with “Underlined” text.
To Others
Setup
Others
Remote Control (
86)
[DVD 1] [DVD 2] [DVD 3]
Clock (
14)
Owner ID (
13)
In order to prevent another person from using this unit if it is
stolen, you can set a PIN number and input your personal
information.
Once the PIN number has been set, you cannot return to the
factory preset. Make sure not to forget this.
PIN number
Name
House No.
Postcode
Power Save
[On] [Off]
Refer to the following when “Power Save” is set to “On”.
Power consumption is minimized when the unit is turned off
(
98).
Startup of the unit becomes slower compared to when “Power
Save” is “Off”.
When the unit is off, satellite programmes cannot be watched
on the TV because the signal from the satellite receiver
connected to AV2 terminal of this unit is not looped through. To
watch them, turn on the unit.
DivX Registration
You need this registration code to purchase and play DivX Video-
on-Demand (VOD) content (
39).
System Update
In order to update this unit, the TV Guide download, and
support system changes made by broadcasts, this unit
periodically performs software updates.
Press [OK] to show the following settings.
Update data and EPG download information are sent by an
unscheduled digital broadcast. In order to receive these updates,
you must be able to receive digital broadcasts.
An update will take approximately 60 minutes. While the update
is in progress, “SW-DL” appears on the unit’s display.
You cannot operate the unit until the update is complete.
Removing the AC mains lead while the update is in progress
may damage the unit.
An EPG download will take approximately 30 minutes.
While the EPG download is in progress, “GUIDE” appears on
the unit’s display. The EPG download can be interrupted by
switching on the unit.
To avoid hearing the startup sound of System Update for the
unit, perform the following steps.
– Select the time for Software Update (
below, TV Guide/
Software search period).
– Set “TV Guide Download in Standby” and “Software
Update in Standby” (
below) to “Off”, and update
manually (
below, Software Update Search Now).
TV Guide Download in Standby
[On]
When the unit is turned off, EPG data is downloaded
automatically.
[Off]
Software Update in Standby
[On]
You can perform the unit updates automatically when
the unit is turned off.
[Off]
TV Guide/Software search period
Selects the time to automatically perform EPG download and
updates when the unit is turned off. This can only be set when
“TV Guide Download in Standby” and “Software Update in
Standby” is set to “On”.
If there is a programmed recording set for the time you have
selected, the programmed recording will be given priority.
When the GUIDE Plus+ system is not available
[Automatic]
The unit will give priority to searching for update
data at midnight.
[02:00–06:00] [06:00–10:00] [10:00–14:00]
[14:00–18:00] [18:00–22:00] [22:00–02:00]
When the GUIDE Plus+ system is available
[Automatic]
[Daytime]
Updating is executed during daytime (06:00–22:00).
Software Update Search Now
Start the search for new software manually.
A new software version is announced by a message. Do not
turn this unit off during the update. This could result in the loss
of data. A message shows that the update has fi nished. If a new
software version is not going to be broadcast until the next few
days, a corresponding message also appears.
If applicable update data is found, press [
,
] to select
“Yes” and press [OK].
GUIDE Plus+ System Information
You can check the condition of GUIDE Plus+ system of this unit.
Post Code
You can input the postal code which is nessesary to download
area specifi c information of GUIDE Plus+ system.
Initialize
Press [OK] to show the following settings.
Shipping Condition
This returns Setup menus to default settings, except for the
ratings level, ratings password, Owner ID and clock settings.
[Yes] [No]
The timer recording programmes are also cancelled.
Default Settings
This returns Setup menus to default settings, except for the
tuning settings, clock settings, disc language settings, ratings
level, ratings password, Owner ID and remote control code.
[Yes] [No]
,
select “Others”
,
select item
OK
Setup
Picture
Sound
Display
Connection
Tuning
Others
RETURN
SELECT
TAB
Disc
Clock
Remote Control
DVD 1
Owner ID
On
Power Save
DivX Registration
System Update
Initialize
DMR-EX78̲88EB.indb 76
DMR-EX78̲88EB.indb 76
2008/02/14 12:19:44
2008/02/14 12:19:44
