117
HDD
RESET
Before requesting service
The following symptoms do not
indicate a malfunction:
î
Normal disc rotation sounds.
î
Weak reception due to atmospheric conditions.
î
Picture interference while searching.
î
Sounds when switching the HDD (Hard disk drive) to SLEEP mode; delayed reaction to
commands in SLEEP mode.
î
Unit does not function with a low-quality disc.
î
The unit stopped running because one of the security settings was activated. (Press and
hold
on the unit for 10 seconds.)
î
When the HDD (Hard disk drive) automatically switches to SLEEP mode, and when the
unit is switched on and off, a brief sound signal can be heard.
Resetting the unit if the unit is frozen
because one of the security settings was
activated.
î
Press and hold [
/I
] on the unit for 10 seconds. (The settings are retained.)
Resetting the security-level settings
î
Press
DVD.
With the disc tray open, press and hold
Rec
and
Play/1.3
on the unit for at
least 5 seconds.
Restoring the default factory settings
while retaining your main settings.
î
In the SETUP menu for Shipping Condition, select the option [Yes]. All settings except for
password, time and security level will be reset to the factory default settings. The timer
recording programmes will also be deleted.
î
In the SETUP menu for Default Settings, select the option [Yes]. All settings except for the
programmed channels and the settings for time, country, language, security-level,
password and remote-control code will be reset to the factory default settings.
î
Press and hold
CH
and
CH
on the unit until the Country menu appears. All settings
except for password, time and security level will be reset to the factory default settings. The
time recording programmes are also erased.
