
123
GUIDE Plus+ system: Questions and answers
How does my unit behave during data transfer ?
During data transfer, "GUIDE" appears on your unit’s display and the unit’s fan switches on.
Is it possible to
programme a recording, with a start and end time that
are different from the GUIDE Plus+ system ?
You can manually change the start and end time of TIMER programmes in the TIMER RECORDING menu.
Does the GUIDE Plus+ system support VPS/PDC ?
The GUIDE Plus+ system works independently of VPS/PDC. However, you can programme TIMER
recordings with VPS / PDC in the TIMER RECORDING menu.
Why was the programme programmed with GUIDE
Plus+ not recorded ?
The unit is not in TIMER standby (TIMER symbol "
" lights up in the unit’s display). / Make sure that [GUIDE
Plus+] is selected under Auto Download Priority and change the setting to [Timer Prog.].
How can I record a programme if "No Data" is
displayed in the GUIDE Plus+ system ?
Programme the Timer recording manually or via ShowView.
How can I cancel a TIMER programming ?
The "T" symbol appears in the GUIDE Plus+ when a TIMER recording is programmed with the GUIDE Plus+
system. To cancel a TIMER RECORDING programming, press
PROG/CHECK
. Select the desired entry and
press
CANCEL
.
Can I receive GUIDE Plus+ system data via a
connected satellite receiver or a Set Top Box ?
No, only via the built-in tuner. To perform timer recordings with satellite receivers or Set Top Boxes, please
use the External Link feature or your unit’s manual timer programming.
What happens when I unplug my unit from the
power outlet ?
The GUIDE Plus+ system data will not be updated. / If the unit is disconnected from the power supply for a
longer period of time, then the GUIDE Plus+ data is lost. / Make sure that the time is set again appropriately.
What happens if my postal code changes, e.g. if I
move ?
Change the postal code in the GUIDE Plus+ Setup menu. If necessary, perform a full Auto-Setup.
Saved GUIDE Plus+ data may be lost.
How can I reset my unit to its original default state ?
Select [Shipping Condition] in the Setup menu. Attention: All settings and data are lost if you reset the unit to
its default state.
DOWNLOAD
RECORDING
GENERAL