21
ENTER
RETURN
12.1. Mi 14:55
Postal Code
0
9
~
Current Country: Germany
GUIDE Plus+ setup
Auto-Setup of the GUIDE Plus+ system
In order to receive data, the country, date and time of your current location must be
set in the basic settings of the unit. When the unit is first set up, the Auto-Setup menu
for the GUIDE Plus+ system will appear after the station search or the
automatic station configuration (Q Link).
You can not setup the GUIDE Plus+ system if the clock is not set.
Auto-Setup
No
Yes
Do you want to setup
the GUIDE Plus+ system ?
ENTER
RETURN
SELECT
To set up the GUIDE Plus+ system, use
to select [Yes] and press
ENTER
.
If you do not want to setup, select [No]. You can perform the Setup at a later
point in time by launching the GUIDE Plus+ system.
Enter the Postal Code of your location with
or the number buttons on the remote
control and press
ENTER
.
Should your Postal Code change, you can update this information at a later point in
time in the Setup of the GUIDE Plus+ system.
Use
to select [Yes] and press
ENTER
. The GUIDE Plus+ data is loaded.
This takes approximately 2 hours. If [No Data] appears for a station after the loading
procedure, check the settings in the Editor of the GUIDE Plus+ system.
Select [No] if you do not want to load the GUIDE Plus+ data.
You can load the GUIDE Plus+ data at a later point in time using the Setup of
the GUIDE Plus+ system.
The GUIDE Plus+ data are loaded automatically when you leave your unit
in standby mode for 24 hours.
78
79
80
78
