∫
Various Setting
61
Underlined items are the factory presets.
ª
Display
On-Screen Messages
Choose whether to show on-screen messages automatically or
not.
[Automatic]
[Off]
Grey Background
Select whether to show the grey background, normally shown
when TV reception is poor.
[On]
[Off]
Channel Guide
[On]
[Off]
FL Display
Changes the brightness of the unit’s display.
[Bright]
[Dim]
ª
Connection
TV Aspect
Choose the setting to suit your TV and preference.
[Norm (4:3)]
[Wide (16:9)]
TV System
[PAL]
[NTSC]
≥
To change the TV system (PAL/NTSC) setting:
While stopped, keep pressing [
∫
, STOP] and [
<
, OPEN/CLOSE]
on the main unit for 5 or more seconds.
≥
If the playback picture on the TV screen from a Video CD isn’t
shown correctly:
- When connecting to Multi-system TV, select “NTSC”. (After
viewing the disc, return the setting to “PAL”.)
- When connecting to PAL TV, the lower part of the picture cannot
be displayed correctly during the fast forward and rewind.
Norm (4:3) TV Settings (DVD-Video)
You can select how to reflect the image on the TV, when you
watch 16:9 images (DVD-Video) on 4:3 TV.
[Pan & Scan]
[Letterbox]
Norm (4:3) TV Settings (DVD-RAM)
You can select how to reflect the image on the TV, when you
watch 16:9 images (DVD-RAM) on 4:3 TV.
[Norm (4:3)]
[Pan & Scan]
[Letterbox]
AV1/AV2 Settings
(Press [ENTER] to show the following settings. To return to the
previous screen, press [RETURN].)
AV1 Output
[Video]
[S-Video]
[RGB] (page 57)
AV2 Input
[Video]
[S-Video]
[RGB (PAL only)]
AV2 Connection
[NORMAL]
[DECODER]
[Ext Link 1]
[Ext Link 2]
≥
If you connect an other equipment with RGB output capability to
the AV2 socket on this unit, the output signal of the equipment
must be set to RGB when you have set “AV2 Input” to “RGB (PAL
only)”.
≥
This setting is fixed with “NORMAL” if you set “TV System” to
“NTSC”.
On
The Channel Guide will appear for a few seconds
when time the channel is changed with [CH,
X
,
W
].
Off
The Channel Guide will not appear.
PAL
Select when connecting to a PAL or Multi-system
TV.
Programmes recorded using NTSC are played as
PAL60.
Select to record TV programmes and PAL input
from other equipment.
≥
[HDD]
: Select this when playing a PAL input
programme recorded on the HDD.
NTSC
Select when connecting to a NTSC TV.
Select to record NTSC input from other equipment.
TV programmes cannot be recorded properly.
≥
[HDD]
: Select this when playing a NTSC input
programme recorded on the HDD.
Pan & Scan
Video recorded for a widescreen is played
with the sides cut off if the pan & scan was
specified by the producer of the disc. 16:9
software prohibited pan & scan style will
appear in the letterbox style (with black bands
above and below the picture) despite the
setting here.
Letterbox
Video recorded for a widescreen is played in
the letterbox style.
Norm (4:3)
Programmes played as recorded.
Pan &
Scan
Video recorded for a widescreen is played with the
sides cut off if the pan & scan format is specified at
the time of recording.
Letterbox
Video recorded for a widescreen is played in the
letterbox style.
NORMAL
When the VCR or a satellite receiver is connected.
DECODER
When a decoder is connected.
Ext Link 1
When a digital receiver which transmits a special
control signal recordings via the 21-pin Scart cable
(e.g. F.U.N. receiver (TU-DSF30/S3)) is connected
for the linked timer recordings.
Ext Link 2
When an external equipment with a timer function is
connected for the linked timer recordings.
DVD(B).book 61 ページ 2003年8月5日 火曜日 午後3時30分