Panasonic DMR-E100H Скачать руководство пользователя

Страница: 27 / 76

∫

Recording

≥

You can record up to 250 programmes on HDD, 99 on a disc.
(1 programme may be recorded continuously for 6 hours at its
maximum.)

≥

[HDD]

- When a programme is being recorded, or the unit is on standby

for timer recording, only programmes of the same encoding
system as selected in “TV System” (i.e. either PAL or NTSC)
(page 61) can be played.

≥

DVD-R has limitations on recording (page 10).

≥

In RGB recording, set “AV2 Input” to “RGB (PAL only)”. (page 61)

Recording/Dubbing/Moving of a programme

This unit incorporates copyright protection technology for recording
equipment known as CPRM (page 10). With some programmes
recording, dubbing and/or moving may not be possible.

You can dub pictures on DVD-R in High Speed if you set “DVD-R
Rec for High Speed mode” to “On” (page 59).

If you set “MPEG4 Rec Mode” (page 59) to “SF”, “F”, “N” or “E”
in advance, you can record SD VIDEO (MPEG4) simultaneously
with the recording of the programme.

When recording an SD VIDEO (MPEG4) programme without
recording limits after recording programmes with recording
limits, the first 10 seconds or around of the SD VIDEO (MPEG4)
programme may not be recorded.

You can dub except SD VIDEO (MPEG4).

You can dub SD VIDEO (MPEG4) only.

You cannot record or dub programmes with recording limits as
SD VIDEO (MPEG4).

Pictures are erased from HDD when moving them to DVD-RAM.

It can be dubbed to the HDD but cannot be played back due to
the copy right protection for the contents.

Move:

This is when a programme is moved to another storage media.
The original programme will be erased.

When using DVD-R

≥

You can play DVD-R on compatible DVD players by finalizing
them on this unit, effectively making them into DVD-Video.

≥

The video is recorded in a 4:3 aspect irrespective of the video
signal input.

When using DVD-R or discs with LPCM recording or
setting “DVD-R Rec for High Speed mode” to “On”

≥

When recording bilingual TV broadcast while receiving a
bilingual TV broadcast

You can use the SETUP menus to select which audio type is
recorded, either “M1” or “M2”. “M1” is the default setting. (page 60,
“Sound”— “Bilingual Audio Selection”)

≥

When recording bilingual audio with connecting to a
decoder or a digital receiver

Select the audio type either “M1” or “M2” on the connected
devices. (You cannot select the audio type on this unit.)

≥

During play

The audio type selected for recording is played. This is displayed
as “LR”.

Recording sound using LPCM

To obtain higher quality recordings using LPCM, prepare as
follows:
1) Select “LPCM” in the SETUP menu, “Sound”— “Audio Mode

for XP Recording” (page 60).

2) Set recording mode to “XP”.

Note

≥

Sound recordings under LPCM require more information than
usual. Consequently the picture quality of LPCM recordings may
be less than that of normal XP mode recordings.

[HDD]

[RAM] [DVD-R]

The unit calculates a recording rate that enables the recording to fit
in the time you set (within the remaining time on the disc) with the
best picture quality.

[1]

While stopped

Press [FUNCTIONS].

(page 29)

[2]

Select “FLEXIBLE REC” with [

] and press [ENTER].

[3]

Press [

] to set the

recording time.

≥