NVR Quick Start
1. Statement:
This manual supports NVR model:1U 4/8ch
、
1.5U 4//9/16ch
、
2U 9/16/36ch
As product update, the NVR functions might be different from the manual showing, please
follow the product that you got.
2. Safety Precautions
1) Do not use wet hand or any damp object to touch the power switch and network digital video
recorder (NVR), in order to avoid electric shock;
2) After installing the host, it must be ensured that the host and the chassis have grounded to
avoid the video, audio signal being disturbed, and to avoid NVR being damaged by static
electricity;
3) The device does not include hard disk. Hard disk should be properly installed before use,
otherwise it can not perform the record and playback;
4) Host system supports format of the hard disk. If the hard disk has been used, please note
whether it is FAT32 format. The embedded network digital video recorder supports only
FAT32 format, otherwise there will be a hidden danger. Note: Please format hard disk when it
is the first time for you to use;
3. Hard Disk Installation
Prepare a screwdriver. Take 1U chassis as an example, this series NVR can have a hard disk
installed in the chassis, the largest capacity of which amounts to 4TB.
3.1
Hard Disk Installation Steps
1
、
Remove the fix screws on the side chassis 2. Connect the hard disk data wire and power,
Open the top cover supply wire
3. Fix the HDD on the bottom plate 4.Put back the cover and fix it by screws
1/ 17
