Getting started
VQT4W67
13
• While writing to/reading from the media, do not switch the
unit to standby mode or remove the media. Such action
may result in loss of the media contents.
• When inserting the media, ensure that it is facing the right
way up.
1 SD card slot indicator
2 Copying indicator
3 Disc indicator
4 Drive (HDD, BD or SD) indicator
5 Remote control signal indicator
6 Main display section indicator
- Current time
- Playback counter
- Various messages (
>
104)
7 Playback indicator
8 USB port indicator
9 Timer recording indicator
• This indicator lights up when the timer
recording standby is activated.
Main unit
1
Standby/on switch (
Í
/I)
Press to switch the unit from on to standby
mode or vice versa. In standby mode, the unit
is still consuming a small amount of power.
2
Open/close disc tray
3
Blue LED
• It is possible to set the LED to turn on/off.
(
>
85, Blue LED)
4
Disc tray
5
USB port
6
SD card slot
• When removing the SD card, press on the
centre of the card and pull it straight out.
Pull to flip down the front panel.
SD card
USB memory, etc.
Disc
7
Recording indicator
• The indicator will light up while recording.
• The indicator will blink while recording is
paused and before recording starts.
8
CALL LED
• The LED will light up when this unit receives
incoming call etc. of the video
communication. (
>
68)
9
Remote control signal sensor
• Angle: Approx. 20° up and down, 30° left and
right
• Distance: Within approx. 7 m in front of the
unit
:
Channel select (
>
23)
;
Start recording (
>
27)
<
Stop
=
Start play
Display
Display
PLAY
COPY
SD USB
HDDSD
BD
1
2
3
4 5
6
7 8
9
DMRBWT835GZ_eng.book 13 ページ 2013年2月1日 金曜日 午後5時4分