Convenient functions
VQT4W67
80
Changing the unit’s settings
Channel List
You can edit the channel list.
• To hide unwanted channels
1 Select the channel.
2 Press [OK].
The check mark is removed.
• Yellow: Reveal all channels.
• To change the channel number assignment
1 Select the channel to change, then press
the green button.
2 Enter the channel number to reassign with
the number buttons.
3 Press [OK].
• To set the channel manually
1 Press the red button.
2 Refer to “Manual Tuning”. (
>
below)
Auto Setup
You can restart the Auto Setup. (
>
19)
Select “Yes”, then press [OK].
• The timer recording programmes are cancelled.
Download from TV
Select “Download from TV” when you connect
the unit to a VIERA Link (HDAVI Control 3 or
later) compatible TV.
Select “Yes”, then press [OK].
Manual Tuning
You can add new channels manually.
1 Press [
3
,
4
] to select the physical channel.
• Adjust the frequency by checking the signal
strength and signal quality displays.
2 Press [OK] to start scan.
• The set channel is displayed in the table.
Digital TV Channel List
1
2
3
4
5
6
7
RETURN
Hide
Select
Swap
Reveal all
Tune
Page up
Page down
Update Channel List
You can update the channel list to the latest one.
Child Lock ( Parental Rating )
You can restrict the viewing of channels
unsuitable to children.
Set a ratings level to limit broadcast viewing and
playback.
• PIN is required to change. (
>
23)
Signal Condition
You can check the quality and strength of
signals.
Press [CH
W X
] to select the channel.
• Signal Quality:
Green bar: Good
Yellow bar: Poor
Red bar: Bad
• The channels you can receive are affected by weather
conditions, seasons, time (day/night), region, length of the
cable that is connected to the aerial, etc.
• When the signal is too strong (red bar), reduce the signal
amplification at your aerial. (For details, consult your
dealer.)
Preferred Language
Select the language for multi broadcast.
If the selected language is not available, then the
original language will be selected.
Audio Description
(When Audio Description is available in the
programme)
When “Automatic” is selected, Audio Description
will be set as default while watching. When timer
recording and copying, Audio Description will be
recorded.
Channel Name
Digital TV Signal Condition
RETURN
Channel Up
Channel Down
Good
Poor
Bad
Signal Strength
0
10
8
6
4
2
Signal Quality
RF Parameter
[ ] MHz
Network Name
CH
DMRBWT835GZ_eng.book 80 ページ ２０１３年２月１日 金曜日 午後５時４分
