4
1.4.
How to Discharge the Capacitor on Flash P.C.B.
CAUTION:
1.
Make sure to discharge the capacitor on FLASH P.C.B..
2.
Be careful of the high voltage circuit on FLASH P.C.B. when servicing.
[Discharging Procedure]
1. Refer to the disassemble procedure and remove the necessary parts/unit.
2. Install the insulation tube onto the lead part of resistor (ERG5SJ102:1k
Ω
/5W).
(an equivalent type of resistor may be used.)
3. Place a resistor between both terminals of capacitor on the FLASH P.C.B. for approx. 5 seconds.
4. After discharging, confirm that the capacitor voltage is lower than 10V using a voltmeter.
Fig. F1
Содержание DMC-F3P
Страница 16: ...16 4 Specifications ...
Страница 23: ...23 7 3 2 Removal of the LCD Unit Fig D3 Fig D4 7 3 3 Removal of the Flash P C B Lens Unit Fig D5 Fig D6 ...
Страница 24: ...24 Fig D7 7 3 4 Removal of the Front Top Case Unit Fig D8 Fig D9a ...
Страница 25: ...25 Fig D9b Fig D10 7 3 5 Removal of the Main P C B and Top Operation P C B Battery Case Unit Fig D11 ...
