Panasonic DMC-F3P, Руководство по обслуживанию

Страница: 2 / 47

2
TABLE OF CONTENTS
PAGE PAGE
1 Safety Precautions ----------------------------------------------- 3
1.1. General Guidelines ----------------------------------------3
1.2. Leakage Current Cold Check ---------------------------3
1.3. Leakage Current Hot Check (See Figure 1.) --------3
1.4. How to Discharge the Capacitor on Flash
P.C.B.----------------------------------------------------------4
2 Warning -------------------------------------------------------------- 5
2.1. Prevention of Electrostatic Discharge (ESD)
to Electrostatically Sensitive (ES) Devices ----------5
2.2. How to Recycle the Lithium Ion Battery (U.S.
Only)-----------------------------------------------------------5
2.3. Caution for AC Cord(For EB/GC) ----------------------6
2.4. How to dispose the Lithium Battery -------------------7
3 Service Navigation ------------------------------------------------ 8
3.1. Introduction --------------------------------------------------8
3.2. General Description About Lead Free Solder
(PbF) ----------------------------------------------------------8
3.3. Important Notice 1:-----------------------------------------9
3.4. How to Define the Model Suffix (NTSC or PAL
model)------------------------------------------------------- 10
4 Specifications ---------------------------------------------------- 16
5 Location of Controls and Components ------------------ 17
6 Service Fixture & Tools --------------------------------------- 19
6.1. Service Fixture and Tools ------------------------------ 19
7 Disassembly and Assembly Instructions --------------- 21
7.1. Disassembly Flow Chart-------------------------------- 21
7.2. PCB Location---------------------------------------------- 21
7.3. Disassembly Procedure -------------------------------- 22
8 Measurements and Adjustments -------------------------- 27
8.1. Introduction ------------------------------------------------ 27
8.2. Matrix chart (Replaced part and Adjustment
item) --------------------------------------------------------- 27
8.3. Execute the Adjustment software
“DscCalDi.exe”. ------------------------------------------- 28
8.4. Adjustment procedures --------------------------------- 29
9 Maintenance ------------------------------------------------------ 38
9.1. Cleaning Lens and LCD Panel ----------------------- 38
10 Block Diagram --------------------------------------------------- 39
10.1. Overall Block Diagram ---------------------------------- 39
11 Wiring Connection Diagram --------------------------------- 40
12 Printed Circuit Board ------------------------------------------ 41
12.1. Fuse location on MAIN P.C.B. ------------------------ 41