Panasonic DMC-F3P, Руководство по обслуживанию

Страница: 26 / 47

26
7.3.6. Removal of the CCD Unit
NOTE:
1. Make sure no dust or dirt gets into the lens.
2. To remove dust from the lens, use airbrush.
3. Do not touch the surface of the lens.
4. Use lens cleaning KIT (BK) (VFK1900BK).
(Fig.D12)
NOTE: (When Assembling)
[Definitions of mount side of Optical filter.]
• Put the Optical filter on the white sheet.
• When the "non -coating side is face up condition, it can be
seen as two-layered filter.
• Set the Coating (Green layer) side to lens side.
[Screwing Order]
• When installing the CCD unit to Lens unit with screw, tighten
the screws in the letters order.(A , B, C.)
NOTE: (When Assembling)
Make sure to confirm the following points when assembling:
• The Screw is tightened enough.
• Assembling conditions are fine. (No distortion, no abnormal-
space.)
• No dust and/or dirt on Lens surfaces.
• LCD image is fine. (No dust and dirt on it, and no gradient
images.)