Convenient functions
VQT4W79
69
Auto Setup
You can restart the Auto Setup. (
>
17)
PIN is required when you have locked channels.
(
>
70, Child Lock List)
Select “Yes”, then press [OK].
• The timer recording programmes are cancelled.
• If you perform “Channel Sorting by Region” (
>
below), you
can sort the channel list best suited to your region after
Auto tuning is finished.
Channel Sorting by Region
If you want to sort the channel list best suited to
your region, follow the on-screen instructions to
select the region you live in.
Normally, you should select “Best signal quality
(All Regions)”.
Manual Tuning
You can add new channels manually.
1 Press [
3
,
4
] to select the frequency.
• Adjust the frequency by checking the signal
strength and signal quality displays.
2 Press [OK] to start scan.
• The set channel is displayed in the table.
Update Channel List
You can update the channel list to the latest one.
Signal Condition
You can check the quality and strength of signals.
Press [CH
W X
] to select the channel.
• Signal Quality:
Green bar: Good
Yellow bar: Poor
Red bar: Bad
• The channels you can receive are affected by weather
conditions, seasons, time (day/night), region, length of the
cable that is connected to the aerial, etc.
• When the signal is too strong (red bar), reduce the signal
amplification at your aerial. (For details, consult your
dealer.)
New Channel Message
Set whether to obtain the information
automatically when a new DVB channel is added.
Channel Name
DVB Signal Condition
RETURN
Channel Up
Channel Down
Signal Strength
Bit Error Rate
Signal Quality
Frequency
[ ]
MHz
Network Name
CH
10
0
10
0
DMR-HWT230EB_eng.book 69 ページ ２０１３年４月１１日 木曜日 午後３時９分
