Getting started
VQT4W79
11
• While writing to/reading from the media, do not switch the
unit to standby mode or remove the media. Such action
may result in loss of the media contents.
• When inserting the media, ensure that it is facing the right
way up.
Main unit
1
Standby/on switch (
Í
/I)
Press to switch the unit from on to standby
mode or vice versa. In standby mode, the unit
is still consuming a small amount of power.
2
Channel select (
>
22)
3
USB port
4
SD card slot
• When removing the SD card, press on the
centre of the card and pull it straight out.
5
Remote control signal sensor
• Angle: Approx. 20° up and down, 30° left and
right
• Distance: Within approx. 7 m in front of the
unit
Pull to flip down the front
panel.
SD card
USB memory
Display
Display
1 Drive (HDD or SD) indicator
2 Copying indicator
3 USB port indicator
4 SD card slot indicator
5 Remote control signal indicator
6 Timer recording indicator
• This indicator lights up when the timer
recording standby is activated.
7 Main display section indicator
- Current time
- Playback counter
- Various messages (
>
86)
8 Playback indicator
9 Recording indicator
• The indicator will light up while recording.
• The indicator will blink while recording is
paused and before recording starts.
PLAY
COPY
SD
USB
HDD
SD
1
4
6
5
3
2
7
8
9
DMR-HWT230EB_eng.book 11 ページ 2013年4月11日 木曜日 午後3時9分