Convenient functions
SQT0802
88
Basic Settings
Update Channel List
You can update the channel list to the latest one.
1 Select the method and settings.
Search Mode
• Free Channels
• All Channels
Scan Mode
• Quick
Scans the suitable frequency for the
selected satellite.
• Full
Scans the whole frequency range.
2 Press [OK].
The unit starts searching for newly available
satellite digital channels.
• This function is not available during an Operator profile
update. (
>
28)
• If the channel you are looking for is not found, select “Full”
for “Scan Mode”. (
>
above)
Exchange Channel List
Exports/Imports DVB-S Channel List settings
using the SD card to share the same settings
with another DIGA which has the same function.
• Export Channel List
You can export the channel list of this unit to
the SD card.
• Import Channel List
You can import the channel list of another
DIGA from SD card.
Signal Condition
You can check the quality and strength of
signals.
• Press [
2
,
1
] to select the LNB.
• Press [CH
W X
] to select the channel.
• The channels you can receive are affected by weather
conditions, seasons, time (day/night), region, length of the
cable that is connected to the aerial, etc.
• When the signal is too strong (red bar), reduce the signal
amplification at your aerial.
• When the signal is weak:
- adjust the position and direction of the dish.
- check that the current digital broadcast channel is
correctly broadcasting.
Antenna System
You can receive several satellites if you have
DiSEqC control antenna system or single cable
router.
1 Select “Antenna System”.
2 Press [
2
,
1
] to select antenna system.
• One LNB
Compatible with Single LNB.
• MiniDiSEqC
Up to 2 LNBs can be controlled.
• DiSEqC1.0
Up to 4 LNBs can be controlled.
• Single Cable
Compatible with single cable router.
LNB Configuration
You can set LNB setting and User Band when
necessary.
• If you do not know the connected satellite,
select “No Satellite” in “Satellite”. (Available
satellite will be searched in Auto Setup.)
• If you select “User defined” in “Satellite”, set
“Test Transponder Frequency” manually.
Preferred Language
(
>
87
)
HbbTV Setting
(
>
87
)
DMR-BST_BCT950EG_eng.book 88 ページ ２０１５年６月５日 金曜日 午前９時１２分
