Troubleshooting
SQT0802
108
Troubleshooting guide
Picture regularly breaks up on some
channels.
• Adjust the reception with “Manual Tuning”.
(
>
86, 87)
The channel which was once selectable
cannot be selected.
• Reveal the channel on the channel list.
(
>
86, 87)
Digital broadcasts cannot be received.
• To receive an encrypted broadcast, a CI module
valid for the broadcast is required.
[BST950]
• The dish may not be pointing in the direction of
the satellite. If problem persists consult your
local TV aerial installer.
• When you use only one terminal, you may not
view correctly if you connect the satellite cable
to the LNB IN 2 terminal.
[BCT950]
Major channels and favourite channels are not
displayed on the top part of the channel list.
•
[DVB-C]
To change channel allocation, restart
Auto Setup in Basic Settings menu and change
channel number allocation selection. (
>
86)
• You can change channel number assignment.
(
>
86)
[BCT950]
[DVB-T]
[BST950]
Picture very infrequently breaks up on some
or all channels.
• Electrical atmospheric interference caused by
bad weather may cause pictures to break up
and audio to mute or distort momentarily.
You cannot access this unit from DLNA
compatible equipment on the network.
• Check the network connection and the network
settings. (
>
20, 24)
• It may not be possible to connect depending on
the types of the equipment or the status of the
equipment.
When using this unit as a server, video frames
are dropped.
• Change the following settings:
- Conversion Setting for DLNA (
>
95)
- Resolution Setting for DLNA (
>
95)
Broadcast
Network
You cannot play contents properly from DLNA
compatible equipment on the network.
• There may be some video that cannot be played
back on DLNA compatible equipment
depending on the equipment.
• Following titles may not be played back:
- A title with access restriction
- A title with contents protection (
>
15)
- A title with incompatible format
- An encrypted title (
)
• Playback via DLNA compatible equipment may
not be performed when this unit is in the
following conditions:
- While playing back a BD-Video
- While simultaneously performing High speed
copy and recording
- While displaying the Basic Settings menu
- While executing functions using a network,
such as Network Service
• If the DLNA compatible equipment is not
capable of outputting HE-AAC audio format,
etc., sound may not be played back.
DMR-BST_BCT950EG_eng.book 108 ページ ２０１５年６月５日 金曜日 午前９時１２分
