Getting started
SQT0802
13
• While writing to/reading from the media, do not switch the
unit to standby mode or remove the media. Such action
may result in loss of the media contents.
• When inserting the media, ensure that it is facing the right
way up.
Main unit
1
Remote control signal sensor
• Angle: Approx. 20° up and down, 30° left and
right
• Distance: Within approx. 7 m in front of the
unit
2
Open/close disc tray
3
Standby/on switch (
Í
/I)
Press to switch the unit from on to standby
mode or vice versa. In standby mode, the unit
is still consuming a small amount of power.
4
CI module eject button (
>
14)
5
CI slot (
>
14)
6
Disc tray
7
USB port
8
SD card slot
• When removing the SD card, press on the
centre of the card and pull it straight out.
Display
Pull to flip down the
front panel.
SD card
USB memory
Disc
Display
1 Main display section indicator
• Messages and other information are
displayed. (
>
110)
2 Drive (HDD, BD or SD) indicator
3 Recording indicator
• The indicator will light up while recording.
• The indicator will blink while recording is
paused and before recording starts.
4 Playback indicator
5 SD card slot indicator
6 USB port indicator
7 Disc indicator
8 Copying indicator
9 Remote control signal indicator
10 Timer recording indicator
This indicator lights up when the timer
recording standby or Keyword Recording
standby is activated.
2
3
8
10
9
5 6 7
4
1
DMR-BST_BCT950EG_eng.book 13 ページ 2015年6月5日 金曜日 午前9時12分