Recording
SQT0802
35
Timer recording
• Some broadcasters may not send programme information.
When programme information is not displayed correctly,
use manual timer recording. (
>
37)
• The receipt of the TV Guide data via Set Top Box is not
possible.
• When timer recording from the external equipment, use
manual timer recording. (
>
37)
• You can set the start and finish time to make the timer
recording work successfully. (
>
89, Timer Record Start
Buffer, Timer Record Stop Buffer)
Refer to “Using TV Guide system”. (
>
29)
1 Select the programme to edit, then press the
red button.
2 Select “Timer Rec Edit”, then press [OK].
3 Go to step 3 on page 37, “Manually
programming timer recording”.
1 Select the programme to cancel, then press
the red button.
2 Select “Timer Rec Cancel”, then press [OK].
(“
F
” disappears)
Refer to “Operation during Recording”. (
>
32)
• You can enter up to 32 programmes within a
month in advance. (Each daily or weekly
programme is counted as one programme.)
• This unit can record three programmes being
broadcasted at the same time.
§
• About CI Plus restriction (
>
15)
• Notes for recording of an encrypted broadcast
(
>
33)
Preparation
If you want to change the recording mode:
Press [REC MODE] and select the recording
mode, then press [OK].
1
Press [GUIDE].
TV Guide screen appears.
2
Select the programme, then press the
red button.
The timer icon “
F
” (red) is displayed.
• If on-screen instructions are displayed,
follow them.
§
[BST950]
The number of programmes that can be
simultaneously recorded varies depending on
the setup environment. (
>
17)
To use TV Guide system
To edit the timer recording on the TV Guide
screen
To cancel a timer recording on the TV Guide
screen
Operation during Recording
DMR-BST_BCT950EG_eng.book 35 ページ ２０１５年６月５日 金曜日 午前９時１２分
