71
Recording
(ENG) DVQX1052
By attaching an XLR microphone adaptor (DMW-XLR1: optional) to the camera, you can
use a commercially-available XLR microphone to enable the recording of superior-quality
high-res/stereo sound.
Preparations:
• Turn this unit off.
• Remove the hot shoe cover that is attached to the camera. (P55)
∫
Setting the sampling frequency
1
Attach the XLR microphone adaptor to the hot shoe of this unit, and then turn
this unit on.
2
Select the menu. (P27)
• This item is available only when using an XLR microphone adaptor.
• The set sampling frequency is also applied to the sound output via HDMI. With [Sound
Down Convert] in [HDMI Rec Output], you can down-convert the sound output via HDMI.
(P69)
• For details, refer to the operating instructions of the XLR microphone adaptor.
You can record motion pictures while hearing the sounds that are being recorded by
connecting a commercially available headphones to this unit.
∫
Adjusting the headphone volume
Connect headphones, and rotate the control dial while the recording screen is
displayed or a motion picture is being played back.
• You can also adjust the volume by touching [
] or [
] during playback.
XLR Microphone Adaptor (optional)
A
Hot shoe
B
XLR microphone adaptor (DMW-XLR1: optional)
C
Commercially available XLR microphone
>
[Motion Picture]
>
[XLR Mic Adaptor Setting]
[96kHz/24bit]
Records high-res sound at
96 kHz/24bit.
Only available when [Rec
Format] is set to [MOV].
[48kHz/24bit]
Records high-quality sound at
48 kHz/24bit.
[48kHz/16bit]
Records standard-quality sound at 48 kHz/16bit.
[OFF]
Records sound using the built-in microphone.
Headphone
: Reduce volume level
: Increase volume level
MENU
DC-GH5LBodyP-DVQX1052_eng.book 71 ページ 2017年2月2日 木曜日 午後3時21分