CQ-C8401U/C8301U/C7401U/C7301U
19
English
General
18
General
CQ-C8401U/C8301U/C7401U/C7301U
The sound type each of which is adjusted with 7 bands
changes every time you press
[SQ]
.
1. FLAT
(default)
2. ROCK
3. POP
Lights when activated.
SQ Selection Based on Genre
(SQ: Sound Quality)
4. VOCAL
5. JAZZ
6. CLUB
Notes:
¡
Setting of SQ, bass/treble and volume are influenced
one another. If the influence mentioned above causes
distortion to the audio signal, readjust bass/treble or
volume.
¡
Each SQ (except FLAT) level is changeable. (
a
page
19)
You can make fine adjustments to the currently selected
SQ presetting in ROCK, POP, VOCAL, JAZZ, or CLUB in
accordance with your car type or taste.
1
Hold down
[SQ]
(Sound Quality) for 2
sec. or more.
The targeted SQ preset appears.
2
Adjust each frequency.
Note:
If you press
[DISP]
, the presetting is can-
celed. The presetting is active until another SQ pre-
set is called up.
[
[
]
: Higher frequency
[
]
]
: Lower frequency
q
: Level Up
w
: Level Down
3
Hold down
[
}
]
or
[
{
]
for 2 sec. or
more to confirm your adjustment.
Note:
You can select a SQ preset to be targeted
with
[
}
]
and
[
{
]
(and
[2]
-
[6]
on the remote con-
trol).
4
Hold down
[
}
]
or
[
{
]
for 2 sec. or
more to confirm your adjustment.
The existing adjustment is overwritten with new
adjustment.
Notes:
¡
FLAT is not changeable.
¡
If no operation takes place for more than 10 sec-
onds, the display returns to the regular mode.
¡
This adjustment is executable in the AUDIO menu
as well. (
a
page 34)
¡
If you hold down
[BAND]
for 2 sec. or more on
the SQ call-up screen, the presetting that is called
up can be turned into the default.
SRC
CQ-C8401U
SRC
CQ-C8401U
Change of SQ Presetting
