![background image](http://html.mh-extra.com/html/panasonic/bl-wv10/bl-wv10_operating-instructions-manual_277446033.webp)
2
Setup
33
2.5.5
Placing Cameras (When Not Using a Router)
After you have registered cameras using Quick Setup and confirmed that images
from the cameras can be displayed, you are ready to place the cameras where you
plan to use them.
1.
Disconnect the cameras and place them where you plan to use them.
•
Refer to page 7 as well as the operating instructions included with your
cameras for proper placement.
2.
Connect all wired cameras to the BL-WV10.
3.
Confirm that mode switch on the back of the BL-WV10 is set to
NORMAL
, and
turn in on.
4.
Turn on all cameras.
5.
Confirm that each images from each camera can be displayed.
Note
•
For wireless cameras, press
DISPLAY
while monitoring to confirm the strength
of the signal received from the camera by the BL-WV10. A weak signal may
cause connection faults and other problems. Position the camera to receive the
strongest signal possible.
•
If a camera can not be access, confirm all connections and refer to the
Troubleshooting section of the Getting Started.
No signal
Poor signal
Weak signal
Strong signal
BL-WV10_OI.book Page 33 Thursday, January 26, 2006 8:03 PM
Содержание BL-WV10
