Panasonic BL-WV10, Руководство по эксплуатации

Страница: 69 / 164

4 Recording Images
69
Recording Errors
When an error occurs during timer or continuous sensor recording, an error icon
appears. Once an error occurs, timer recording stops. Press
1 to cancel the
settings, and re-do them to begin recording again.
Icon Causes and Solutions
SD memory card is full.
The remaining capacity in recording time for the SD is displayed.
Erase unneeded images to obtain sufficient capacity (see page 75,
page 77).
The camera could not be accessed for the duration of the
programmed recording time.
Environment conditions (page 7) may be causing poor wireless
communication quality. Check the connection to the camera.
A “ (quotation mark) was used in the FTP User Name or Password
(see page 88). Confirm the correct information and enter it again.
The camera's [Limit time of Continuous Motion JPEG] setting is not
set to [Unlimited]. Refer to the your camera's operating instructions
for more information.
The camera's [Operation Time] setting is enabled for the time that
the recording was to take place. Refer to the your camera's
operating instructions for more information.
An error in writing to the SD memory card.
If the SD memory card is write-protected, disable write-protection.
Do not remove or insert SD memory cards during timer recording.
The camera is in privacy mode.
Turn off privacy mode (see page 94).
There is no SD memory card inserted.
Insert an SD memory card.
Other error
Do not remove or insert SD memory cards during timer recording.
The camera could not be accessed previously. The BL-WV10 will try
again to record images from this camera.
BL-WV10_OI.book Page 69 Thursday, January 26, 2006 8:03 PM