![background image](http://html.mh-extra.com/html/panasonic/bl-wv10/bl-wv10_operating-instructions-manual_277446031.webp)
2
Setup
31
3.
Connect the camera to the power outlet.
4.
Wait while the Quick Setup utility restarts, configures, and registers the
camera.
•
When the camera has been configured and registered, [Finished] is
displayed next to the camera name ([CAM1], for example) and the alarm
sounds.
•
If [This camera's firmware is out of date] is displayed, you must update the
camera's firmware. Refer to the information on page 3. It is also
recommended that you erase the camera (see page 104) and then
register it again.
5.
To register another camera, connect the camera to one of the LAN jacks of
the BL-WV10, then turn the camera on by connecting it to the power outlet.
6.
When you have finished registering all cameras, set the BL-WV10's mode
switch to
NORMAL
and disconnect the DC cord from the rear of the unit.
You are now ready to view camera images (see page 32).
Ethernet cable
LAN jacks
Rear panel of
BL-WV10
Bottom of BL-C30
Rear panel
of camera
To
power
outlet
BL-WV10_OI.book Page 31 Thursday, January 26, 2006 8:03 PM
Содержание BL-WV10
