Panasonic BL-WV10, Руководство по эксплуатации

Страница: 104 / 164

6 Setup Menu
104
6.5 Erasing a Camera
1.
Select [Camera Setup] from the [Setup] screen (see page 79) and press
ENTER .
2.
Select the camera to be erased from the list and press 1 .
• The confirmation screen appears.
3.
Select [Yes] and press ENTER .
• The camera is erased from the list.
• Once erased, the camera is unregistered.
If you attempt to erase a camera set for timer recording, one of the following errors
will appear.
When timer recording is set:
“This camera is used for timer recording. Turn off the record program.”
Erase the timer recording program (see page 68) and then try erasing the camera.
When continuous sensor recording is set:
“This camera is used for sensor recording. Turn off the record program.”
Erase the sensor recording program (see page 68) and then try erasing the
camera.
When both timer and continuous sensor recording is set:
“This camera is used for timer recording. This camera is used for sensor recording.
Turn off the record program.”
Erase the timer recording and sensor recording programs (see page 68), then try
erasing the camera.
Note
• If turning the timer off by pressing TIMER does not cancel the timer recording,
the camera cannot be erased.
When the camera is used for Sensor Alert:
BL-WV10_OI.book Page 104 Thursday, January 26, 2006 8:03 PM